Motorcycles Caring Tips

As the capital that can transport through a traffic jam, the motor was dead beat. Yet for optimum performance, do not ever ignore motor maintenance.

Here's a tip easily treat the motor:

1. Check the condition of oil, because oil plays an important role to grease the machine components, such as the handlebar piston, piston, and piston rings, axles and noken crutches or handlebar as valve. If the grease is colored or blackish lumasnya power reduced flexibility, it should be replaced with oil according to manufacturer's recommendations.

2. Check the battery condition. Do not let water through the battery maximum and minimum limits which could result in accelerated damage to the battery cells. Add the battery in the morning. Immediately replace the battery if the battery or have started to weaken.

3. Check the chain and gears. Do not let the chain is too loose or too tight. Check also the condition of gear, if it is a sharp change soon because otherwise the chain can suddenly end.

4. Check the coil and spark plug wires. Immediately replace the cable that looks old enough and a lot of visible cracks and hardening of the cable. Do not forget to note the presence of spark plug for spark plugs is vital for smooth running of a vehicle engine.

5. Note the gas hose. Do not let the fuel hose condition occurs hardens or cracks, because the inside of the hose can be elastic and has not resulted in powders derived from waste carried into the carburetor hose.

6. Heat engine for two minutes. Heat engine before the motor is run in order to lubricating oil circulation throughout the inside of the machine moving.

7. Check your tire pressure. Do not be too hard and also not less because it can result in damaged motorcycle tires developed.

8. Always use original spare parts.