Practical tips for motorcycle clutch is not heavy

Motorhome is giving a different sensation than the car. Here the ability to drive is very reliable. Especially if you're nyelap-weaving in between traffic jams.

However, motorhome that does not mean no problems whatsoever. The driver of a motor type "man" a lot of sprained his left hand. Why especially if the bike is not clutch too hard when withdrawn. If it were so, what should be done so that the motorcycle clutch was light and comfortable?

There are tricks that can be done to mitigate the clutch, ie by adding a small device called tul.

The tool is quite affordable price. Later setut clutch lever is located on the right gear box. With this setut original lever grew longer, so the load becomes lighter.

If it is cold, loosen the clutch on the right crankcase using a spanner 14. Remove the clutch holder. Pengenteng Slip clutch to clutch lever setut. Then press plate clamps peringan using pliers.

After that a new pair of bolt and Squeeze with a ring spanner and 8. Slip the wire retaining clutch again, then reset the clutch.

If you've done these steps, will become more easily couplings.